|
Publications
| | Minutes and Presentations of the Spring 2005 Meeting, April
12-13, 2005
hosted by SAE World Congress, Detroit, Michigan
Minutes here
Agenda here
Presentations
(for which we obtained permission to publish): Tuesday Sessions
- Comments on Notch Strain
and Fatigue, Norman E. Dowling, Virginia Tech, be careful, 19 MB!, this
paper can also be found here: www.esm.vt.edu/~ndowling/
- Contact Fatigue Tests and Contact Fatigue Life Analysis, Hong Lin, Gregory
A. Fett, Robert R. Binoniemi, Mick Deis, Dana Corp.
- Thermal Mechanical Fatigue Simulation of Cast Iron Cylinder Heads, Franz
Zieher, Franz Langmayr, Andrej Jelatancev, AVL List GmbH
- The Rolling Contact Fatigue Behavior of Nb and B Added Microalloyed
Forging Steels, J.S. Lee, C. H. Son, B. H. Song, C. N. Park, FAG Bearings
Korea Corp.; D. Y. Kim, C. W. Park, S. D. Wang, SeAH Besteel Corp.
- Numerical Analysis of Optimum Peening Condition in Terms of Collision
Energy on Coil Spring by Shot Peening, Ayamitsu Amano, Takayuki Sakakibara,
Masami Wakita, Chuo Spring Co., Ltd.
- Fatigue Life of Stabilizer Bars and Specimens for Two Microstructural
Conditions: Pearlitic and MartensiticMarco Antonio Colosio, General Motors
of Brazil; Arnaldo Homobono Paes de Andrade, Nuclear & Energetic
Research Institute - IPEN
- Structural Durability Proof of Automotive Aluminum Safety Components -
Present State of the Art, C. M. Sonsino, A. Berg-Pollack, V. Grubisic,
Fraunhofer LBF
- Durability Assessments of Motorcycle Handlebars, Ken-Yuan Lin, Automotive
Research & Testing Center; Shun-Hui Chang, Jiun-Ren Hwang, National
Central Univ.; Chin-Ping Fung, Chung Cheng Institute of Technology;
Jung-Ming Chang, Jui-Hung Wu, Chih-Huang Chang, Automotive Research &
Testing Center
- Statistical Approaches Applied to Fatigue Test Data Analysis, Carlos C.
Engler-Pinto, Jr., John V. Lasecki, Michael A. Dejack, Robert J. Frisch Sr.,
John E. Allison, Ford Motor Co.
- Sensitivity Study of Staircase Fatigue Tests Using Monte Carlo Simulation,
Jiangtao Song; Paul N. Crepeau, General Motors Corp.; Zissimos Mourelatos,
Randy Gu, Oakland Univ.
- Examining Specimen Bending Strain and Computing Misalignment Correction
for Axial Load Frame Material Testing, Randy Ellis, MTS Systems Corp, screen
shots here, power point here
- Fatigue Life Assessment Approach to Ride Comfort Optimization of a
Passenger Car under Random Road Execution Conditions, Alireza Kazaiezadah,
SAIPA/AIRIC, canceled talk
- Mean Stress Effects in Stress-Life
and Strain-Life Fatigue, Norman E. Dowling, Virginia Polytechnic Institute,
the associated paper is posted here and
also can be found at this link: http://www.esm.vt.edu/~ndowling/DowlingBrasilPaperPDF%204-9-04.pdf
this talk was not in the orignal program and was given as a subsitution to
the above canceled talk
Wednesday Sessions
Fuchs Travel Award
Bolt Session
- A Study of Loosening and Fatigue of Bolted
Joints under Transverse Vibration Shinji Hashimura, Kurume National College
of Technology; Darrell F. Socie, Univ. of Illinois at Urbana-Champaign
- Fatigue of High Strength Bolts Rolled Before or
After Heat Treatment with Five Different Preload Levels Ralph I. Stephens,
Nathan J. Bradley, Nate J. Horn, Jeffrey J. Gradman, James M. Arkema,
Christian S. Borgwardt, Univ. of Iowa
- 3D Elastic-Plastic Finite Element Bolt-Nut Models
and Life Calculations Nate Bradley, Univ. of Iowa
- Sources of Fatigue Failures of Threaded Fasteners Jess Comer, Iowa St.
Univ.
- M-Alpha Method Applied to Tightening and
Loosening of Fasteners Ralph Shoberg, R&S Technologies
Weld Session
Weld
Challenge
Solution for Weld Challenge #4
|
